Post by Admin on Dec 12, 2018 20:10:18 GMT -5
... otherwise referred to as "emulsion" bleeds, or the "emulsion package"...
Top bleeds located at float/fuel level, centered pretty much inline with the bottom of the accelerator pump passage:
Lower bleeds located approximately 7/16" below the top bleeds:
All four bleeds most usually originally sized at 0.028". The bleed size itself is actually down inside of the bigger visible drillings.
Top bleeds located at float/fuel level, centered pretty much inline with the bottom of the accelerator pump passage:
Lower bleeds located approximately 7/16" below the top bleeds:
All four bleeds most usually originally sized at 0.028". The bleed size itself is actually down inside of the bigger visible drillings.
